How to Choose a Sustainable Exhibition Stand Builder

How to Choose a Sustainable Exhibition Stand Builder

Business & ROIPractical Guides & Tips

Quick answer: Judge a sustainable exhibition stand builder on four things they can evidence rather than claim: a kg CO₂e embodied carbon figure with a stated methodology, a materials breakdown by weight with recycled content and recyclability percentages, third-party certificate numbers such as FSC chain of custody and ISO 14001, and a documented end-of-life plan naming the waste stream. Also check they have built at your venue before, because access, height limits and build windows vary enormously and venue inexperience causes more problems on site than anything else.

There is no barrier to describing yourself as a sustainable exhibition stand builder. The term is unregulated, the claims are rarely checked, and the gap between suppliers who have genuinely changed how they build and suppliers who have changed their website is wide.

This is how to tell them apart, and what else matters beyond sustainability when you are choosing who builds your stand.

What a Stand Builder Actually Does

Worth clarifying, because the roles get conflated and you can end up paying two suppliers for overlapping work.

Role

Responsible for

Stand designer

Concept, visuals, spatial layout. May not build anything.

Stand builder

Design plus manufacture plus delivery. Usually the whole job.

Shell scheme contractor

Appointed by the organiser. Builds the basic booth shells, not your fit-out.

Installation contractor

On-site build and dismantle only. Sometimes the builder, sometimes separate.

The strongest suppliers handle design and manufacture in house. Ones that outsource the build cannot credibly evidence their material claims, because they do not control what actually gets made.

Ten Questions to Ask Any Builder

Send these with your brief. A serious supplier will answer all ten without hesitation.

  1. What is the embodied carbon of the proposed build in kg CO₂e, and which methodology did you use? GHG Protocol, ISO 14064 or a supplier EPD. A figure without a methodology is a guess.
  2. What is inside and outside your system boundary? Specifically, does it include transport to and from the venue, and end of life? Excluding those is the most common way a low figure gets manufactured.
  3. What is the materials breakdown by weight? With the percentage that is recycled content and the percentage recyclable at end of life.
  4. Can you give me your FSC chain of custody certificate number? Anyone can display the logo. Only certified suppliers can quote the number.
  5. Are you ISO 14001 certified, and what is the certificate number? This is the baseline environmental management standard.
  6. What happens to the stand after the show? Name the waste stream, name who removes it, and give percentages for reuse, recycling and landfill.
  7. Do you manufacture in the UK? A stand shipped from the Far East has a transport footprint that cancels most of the material savings.
  8. Have you built at this venue before? Ask for the specific venue, not just the city.
  9. What is included and excluded in the price? Venue services, flooring, furniture and AV are commonly excluded and commonly assumed.
  10. Are your sustainability claims compliant with the CMA Green Claims Code? Ask for it in writing, because if you repeat their claim in your own marketing the risk transfers to you.

Question two is the one that catches people out most often. A stand can be presented as very low carbon by counting only the materials and quietly leaving out two return journeys of a seven tonne vehicle. See Can an Exhibition Stand Really Be Carbon Neutral? for how these figures get constructed.

What a Good Answer Looks Like

To make questions three and four concrete: the engineered cardboard we build with is Xanita, and the manufacturer publishes both an environmental declaration and a print fibre composition statement. A supplier who can hand you documents like those is a materially different proposition from one who answers with adjectives. Ask every shortlisted builder for their equivalent.

Why Venue Experience Matters More Than You Think

Sustainability is the question buyers now ask. Venue experience is the one that determines whether build day goes smoothly, and it gets asked far less often.

Every venue has its own rules on height limits, fire certification, rigging, access routes and build windows, and organisers layer their own requirements on top. A builder who has worked the venue knows the marshalling yard booking system, the lift dimensions if you are not on the ground floor, and which hall has the awkward height cap.

The venues where this matters most are the converted and historic ones, where access is genuinely constrained:

  • Olympia London and the Business Design Centre, both historic buildings with tighter routes and multiple levels
  • Manchester Central, a converted railway station with mixed hall and conference spaces
  • Purpose built halls such as the NEC, ExCeL London, Farnborough and the SEC are more forgiving on access and height

This is also where lightweight construction earns its keep. A flat pack cardboard stand goes through standard doorways and passenger lifts and assembles in three to four hours without tools, which removes most of the access risk at the difficult venues. Our guide to UK venue requirements covers what to confirm at each.

Five Red Flags

  • "100% sustainable" with no numbers. Sustainability is a set of measurable inputs, not a single adjective. No percentages means no measurement.
  • "Carbon neutral" achieved purely through offsets. Under the CMA Green Claims Code this needs a documented reduction plan first. Offsetting alone does not support the claim.
  • An FSC logo with no certificate number. Ask for it. If it does not arrive, it does not exist.
  • Vague material names. Real answers name products: Re-board, FSC birch ply, Hydro CIRCAL aluminium, dye sublimation polyester. "Eco materials" is not an answer.
  • No end-of-life plan. If a supplier will not say what happens to the stand after the show, the answer is the venue's general waste skip.

What a Good Supplier Tells You That You Did Not Ask

One useful test that has nothing to do with certificates: does the supplier ever tell you that you do not need what you are asking for?

A builder who recommends a reusable modular system for a brand attending two shows a year is either not paying attention or is selling. The right answer for one to three deployments is a recyclable build, and the right answer above six is a modular system, and a supplier worth using will tell you which applies to you even when it means a smaller invoice.

Similarly, a builder who only ever recommends their own material regardless of your brief is not advising you. EcoStands Green specialises in cardboard, and where a project genuinely needs FSC timber or recycled aluminium we refer it to our parent company Expositionists rather than forcing the wrong material at it.

Frequently Asked Questions

How do I choose a sustainable exhibition stand builder?

Judge them on four things they can evidence rather than claim: a kg CO2e embodied carbon figure with a stated methodology such as GHG Protocol or ISO 14064; a materials breakdown by weight showing recycled content and recyclability percentages; third-party certificate numbers for FSC chain of custody and ISO 14001; and a documented end-of-life plan naming the specific waste stream and who removes the stand. Also confirm they manufacture in the UK and have built at your venue before.

What questions should I ask an exhibition stand builder?

Ten essentials: embodied carbon figure and methodology; what is inside and outside the system boundary, especially transport and end of life; materials breakdown by weight; FSC chain of custody certificate number; ISO 14001 certificate number; what happens to the stand after the show; whether they manufacture in the UK; whether they have built at your specific venue; exactly what is included and excluded in the price; and written confirmation their claims comply with the CMA Green Claims Code.

Does it matter if a stand builder has worked at my venue before?

Yes, considerably. Every venue sets its own height limits, fire certification requirements, rigging rules, access routes and build windows, and organisers add their own on top. It matters most at historic and converted venues such as Olympia London, the Business Design Centre and Manchester Central, where access routes are constrained and multiple levels are involved. Purpose built halls like the NEC, ExCeL and the SEC are more forgiving.

What is the difference between a stand designer and a stand builder?

A stand designer produces the concept, visuals and spatial layout but may not manufacture anything. A stand builder handles design, manufacture and delivery, usually the whole job. A shell scheme contractor is appointed by the organiser and builds only the basic booth shells, not your fit-out. An installation contractor handles on-site build and dismantle. The strongest suppliers do design and manufacture in house, because outsourced builders cannot evidence their own material claims.

How can I tell if a builder's sustainability claims are genuine?

Ask for evidence rather than assurance. Five red flags: percentage-free claims such as "100% sustainable"; carbon neutral claims achieved purely through offsetting, which does not meet the CMA Green Claims Code without a documented reduction plan first; an FSC logo with no certificate number; vague material descriptions rather than named products; and no end-of-life plan. If a supplier will not say what happens to the stand after the show, the answer is general waste.

Should a stand builder manufacture in the UK?

For a UK show, yes. A stand manufactured in the Far East carries a transport footprint that cancels out most of the material savings you were buying the sustainable build for. UK or near-EU manufacture keeps freight emissions proportionate, shortens lead times, and makes it far easier for the supplier to evidence their supply chain when you ask for certificates.

Next Steps

Send us the show, the venue and your footprint and we will come back within one working day with a design direction, a fixed booth supply price, and answers to all ten questions above in writing. Request a sustainability brief from EcoStands Green.

See also our FSC chain of custody certification and corporate responsibility statement.

Related Reading

← Back to Blog
How to Choose a Sustainable Exhibition Stand Builder (2026)